CPC30220 Certificate III in Carpentry
Course Code and Name:
CPC30220 Certificate III in Carpentry
This qualification provides a trade outcome in carpentry, covering work in residential and commercial applications.
To achieve this qualification, the candidate must demonstrate competency in 34 units of competency. This is comprised of 27 core units and 7 elective units.
A minimum of five units must be selected from Group A and the remaining units can be seleted from Group A or Group B. A maximum of two of the required elective units may be substituted by selecting relevant units of competency from any group or current training package, as long as it contributes to a valid, industry-supported vocational outcome and maintinas the AQF level of this qualification.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification.
For more information on this qualification, please contact Australian Consolidated Training.
UNITS OF COMPETENCY
CPCCCA2002 Use carpentry tools and equipment
CPCCCA2011 Handle carpentry materials
CPCCCA3001 Carry out general demolition of minor building structures
CPCCCA3002 Carry out setting out
CPCCCA3003 Install flooring systems
CPCCCA3004 Construct and erect wall frames
CPCCCA3005 Construct ceiling frames
CPCCCA3006 Erect roof trusses
CPCCCA3007 Construct pitched roofs
CPCCCA3008 Construct eaves
CPCCCA3010 Install windows and doors
CPCCCA3016 Construct, assemble and install timber external stairs
CPCCCA3017 Install exterior cladding
CPCCCA3024 Install lining, panelling and moulding
CPCCCA3025 Read and interpret plans, specifications and drawings for carpentry work
CPCCCA3028 Erect and dismantle formwork for footings and slabs on ground
CPCCCM2006 Apply basic levelling procedures
CPCCCM2008 Erect and dismantle restricted height scaffolding
CPCCCM2012 Work safely at heights
CPCCCO2013 Carry out concreting to simple forms
CPCCOM1012 Work effectively and sustainably in the construction industry
CPCCOM1014 Conduct workplace communication
CPCCOM1015 Carry out measurements and calculations
CPCCOM3001 Perform construction calculations to determine carpentry material requirements
CPCCOM3006 Carry out levelling operations
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
CPCWHS3001 Identify construction work hazards and select risk control strategies
Group A - Specialist Electives
CPCCCA3009 Construct advanced roofs
CPCCCA3012 Frame and fit wet area fixtures
CPCCCA3014 Construct and install bulkheads
CPCCCA3018 Construct, erect and dismantle formwork for stairs and ramps
CPCCCA3019 Erect and dismantle formwork to suspended slabs, columns, beams and walls
CPCCCA3020 Erect and dismantle jump-form formwork
CPCCCA3022 Install curtain walling
CPCCCA3027 Set up, operate and maintain indirect action powder-actuated power tools
CPCCCM2002 Carry out hand excavation
CPCCCM3001 Operate elevated work platforms up to 11 metres
CPCCJN3003 Manufacture components for doors, windows and frames
CPCCJN3004 Manufacture and assemble joinery components
CPCCJN3100 Process materials to produce components using static machines
CPCCON3048 Construct tilt panels on site
CPCCSF2004 Place and fix reinforcement materials
CPCCWC3003 Install dry wall passive fire-rated systems
CPCCWC3004 Install suspended ceilings
Group B - General Electives
CPCCCA3011 Refurbish timber sashes to window frames
CPCCCA3026 Assemble partitions
CPCCCM3005 Calculate costs of construction work
CPCCLSF2001 License to erect, alter and dismantle scaffolding basic level
CPCCOM1013 Plan and organise work
CPCCPB3001 Fix standard plasterboard wall sheets
CPCCPB3002 Fix standard plasterboard ceiling sheets
CPCCSF2005 Arc weld reinforcement steel
CPCCSF3002 Carry out monostrand post-tensioning
CPCCSF3003 Carry out multistrand post-tensioning
CPCCSF3004 Carry out stressbar post-tensioning
CPCCST4001 Prepare to undertake the heritage restoration process
CPCCST4002 Undertake the heritage restoration process
CPCPCM2043 Carry out WHS requirements
CPCPCM2052 Weld mild steel using oxy-acetylene equipment
CPCPCM2053 Weld using manual metal arc welding equipment
CSQ Skills Assessment and Gap Training Funding (Recognition of Prior Learning and Gap Training)
Construction Skills Queensland (CSQ) is an independent, not-for-profit, industry funded body supporting employers, workers, apprentices, trainees and career seekers in the building and construction industry. Funding subsidies may be available to eligible Queensland workers for skills assessment and up to 10 units of gap training, valued at up to $5,500. A minimum of 2 Gap Training units applies. Participants must be able to demonstrate RPL experience in a minimum of 70% of the units of competencies required to complete this qualification, and of these units have no more than 50% Credit Transfer.
Recognition of Prior Learning
Recognition of Prior Learning (RPL) is an assessment process that involves assessment of an individual's relevant prior learning (including formal, informal and life learning).
Australian Consolidated Training offers RPL for all accredited courses. For this qualification, four (4) years experience in the carpentry industry is indicative of success. For those who do not have four years experience, please contact us to discuss your options.
Please click the "Recognition of Prior Learning" button for more information.
Australian Consolidated Training offers on-the-job apprenticeships funded by User Choice Queensland. This qualification is funded by the Department of Employment, Small Business and Training for Queensland apprentices.
Apprenticeships are completed on-the-job with support from Australian Consolidated Training's highly experienced Trainers/Assessors. This model suits employers who do not wish to send their apprentices to block release training, and who would like to take an active role in the training of their apprentices.
This model does not suit all employers and the apprentice must have access to a qualified onsite supervisor who can mentor them and provide evidence of practical training.
Some units of competency may not be able to be taught in the workplace. In this case, some offsite training may be required.
Student Contribution Fees apply. Please refer to the "Apprenticeships" button below for more information.